| TSP Lab | IMSI - IMEI Collector service | Sga-IC |
|---|
| description | module | version | configuration files |
|---|---|---|---|
| For Windows-based monitor units | |||
| Windows 2000 Professional or Windows XP Professional | Operating system | modified registry entries | |
| Sga7N137.obj | SGA card SS7 firmware | v1.37 | <none> |
| ICMonitor.exe | Main monitoring software | v1.02 | entries of Monitor.ini |
| Button | Meaning |
|---|---|
|
| Shows the status of the cards working in the monitor |
|
| This function is unavailable in this version |
|
| This window provides information about the network connections |
|
| Gives miscellaneous information |
| Record (checkbox) | If checked the program saves SS7 messages and card events in PKT files into INI/[General]/RecordDir (for debug purposes) |
Configuration (ICMonitor.ini) file settings
| Section | Entry | Example | Meaning |
|---|---|---|---|
| [General] | |||
| RecordDir | d:\Recordings | Path for recording SS7 network data (if Record checkbox is checked) | |
| LogDir | d:\LogFiles | Path for log files | |
| Sga47PSysPath | c:\IC-Monitor\Sga47PDriver.sys | Name and path of the Windows driver of Sga47P16 cards | |
| StatIntervalSecs | 900 | Statistics sending interval in seconds | |
| NTPServerAddress | 10.117.144.200 | Server IP address providing NTP synchronization | |
| NTPSynchronIntervalSecs | 900 | Time synchronization interval of Sga47 cards | |
| NTPMinAdjustmentMSecs | 3 | When the different between timer of cards and the answer of NTP server is less than this value no adjustment will be made [msec] | |
| NTPNotifyAdjustmentMSecs | 10 | If the adjustment is higher than this value an alarm will be sent about it [msec] | |
| NTPMaxAdjustmentMSecs | 7200000 | No adjustment if the different is higher than this value [msec] | |
| NTPRoundTripTimeMsecs | 10 | Defines the maximum round trip time of an NTP request | |
| PollerAddress | 111.222.33.44 | IP-address of the server running the Poller module. | |
| PollerPort | 8000 | Port where Poller module accepts the connection from Monitor | |
| KeepAlive | 1 | Defines that the monitor uses KeepAlive feature for network connections | |
| LogCardEvents | 1 | Enable or disable logging events about cards and links. If it is disabled events can be followed on the Card screen. | |
| LogTimeOnScreen | 1 | Every entry on the screen log has timestamp. | |
| [CardN] | For every card in the Monitor unit belongs a [CardN] section containing its settings. (N must be replaced with the sequential number of the card, e.g. [Card0] for the 0th, [Card1] for the 1st card, etc.) | ||
| Id | 0 | The ID set on the N'th card. This can be adjusted with switches on the cards. All Ids must be different within a Monitor unit. | |
| Type | Sga47SS7 | Type of the Sga card inserted into the machine
| |
| TMSObjectPath | c:\IC-Monitor\Sga7N135.obj | DSP code filename (and its path if needed). It can be the followings for the differrent card types:
| |
| AM186CodePath | c:\IC-Monitor\AM186.bin | Name of the file that contains the code loaded into the AM186 processors of the Sga cards This may be necessary for low voltage-level signaling links. If 0, turns the amplification feature of this processor off. | |
| AmplifyX | 1 | Sga47SS7 cards can amplify connected PCM trunks if its voltage level is too low to work correct.
(X must be 0 or 3.) If it is 1, it turns on the amplification feature for the Xth processor of Sga47SS7 cards. If it is 0, it turns the amplification off. | |
| [SS7Links] | In this section the monitored SS7 links can be defined | ||
| Link | SS0 0/0 1 |
|