TSP Lab	Sga-WM Event Log Display	SgaWMEvD

The Sga-WM Event Log Display module
`("SgaWMEvD")`

Basic operation

Scans the working directory periodically for input; i.e., event files (Sga-8002.xxx) to be processed.
Processed events are written into log.

Menu	Menuitem	Shortcut(s)	Meaning
[Log]
	Find line containing...	(Ctrl-F)	Find text in log window
	Find next matching line	(F3)	Find next occurrence of text in log window
	Details		Detail level of logging (Off, Normal, Detailed or Debug)
	Consider all links up	(Ctrl-U)	Considering all links are up
[Options]
	Go on / Pause	(Ctrl-P, or )	Allow periodic scanning of the working directory for `Sga-8002.xxx` files
	Auto scroll	(ScrollLock, or )	Allow automatic scrolling of the log screen
	Save settings		Save actual settings into the configuration (`SgaWMEvD.INI`) file

Section	Entry	Example	Meaning
[Position]
	iLeft	140	Position of the program module on the display screen
	iTop	72	Position of the program module on the display screen
	iWidth	995	Position of the program module on the display screen
	iHeight	694	Position of the program module on the display screen
[Options]
	bAutoScroll	True	(Refer to the `[OPTIONS]/Auto scroll` menuitem!)
[Advanced]
	wLogDetailLevel	3	(Equals to the listed order; refer to the `[LOG]/Details menuitem!)`
	wMaxCPUUsagePercent	25	Limit of CPU-usage for this module
	dwMaxLinesInLogWindow	1000	Number of lines in the log window on screen
	bAlternateTrapUID	False	Enables or disables generation of traps with alternate UID
	sTrapFilesPath	d:\TrapFiles	Path for the trap files
	sLogFilesPath	d:\LogFiles	Path for the LOG files

Type	Text	Remarks
INF	'Sga-WM Events Display v1.05' module is started.	When the module is started.
INF	MN3 [LN5<<<] PCM Frame Alignment is restored.	direction "<<<" of LN5 link on MN3 monitor is available first
CRI/CEA	MN3 [LN5<<<] Link has become unavailable.	CEA when link is available again
CRI	MN3 Monitor Unit card error: incorrect data from TMS or Am186.	Data received by the monitor from Sga47 card is incorrect typically caused by HW problem
ERR	MN3 Monitor Unit error: MSU data loss.	Monitor lost MSU's due to HW problem or overload
WAR	Monitor Unit: NTP Error.	When `ICMonitor.ini/[General]/NTPServerAddress` is not reachable by the monitor
WAR	Monitor Unit: Too high clock adjustment.	Time adjustment is higher than `ICMonitor.ini/[General]/NTPNotifyAdjustmentMSecs`
WAR	'Sga-WM Events Display v1.05' module has been shut down by operator.	a farewell WARning message

v1.05

(n) New warning: "Monitor Unit: NTP Error.", UID=33 if bAlternateTrapUID=True; SNMPtrap is also generated.
(n) New warning: "Monitor Unit: Too high clock adjustment.", UID=34 if bAlternateTrapUID=True; SNMP trap is also generated.
(c) Trap level of "Monitor Unit error: MSU data loss." is changed from WAR to ERR.
(c) Log on start-up includes the section name for particular INI settings.
(c) Opening and closing (and deleting) of input files are logged only in case of LogDetailLevel=Debug
(n) Hex dump of event packet is logged in case of LogDeatilLevel=Debug.
(c) Refresh interval can no longer be set; the default '1000ms' setting will always be applied.
(c) INI/[Advanced]wRefreshInterval is obsolete

v1.04

(c) Entry name INI/[Advanced]/sDataPath is changed for INI/[Advanced]/sLogFilesPath (and now defaults to "c:\LogFiles")
(n) Shift-ESC combination minimizes application window

v1.03

v1.02

(n) INF trap: "MN3 [LN5<<<] PCM Frame Alignment is restored."; when link is available first
(n) CRI trap: "MN3 [LN5<<<] Monitor Unit card error: incorrect data from TMS or Am186."
(n) WAR trap: "MN3 [LN5<<<] Monitor Unit error: MSU data loss."
(n) WAR trap: "'Sga-WM Events Display v1.02' module has been shut down by operator."; send a farewell WARning message
(n) INI/[Advanced]/sTrapFilesPath, defaults to "c:\data\traps"
(c) Obsolete "PCM signal lost." error indication is removed
(c) Obsolete "Alarm Indication Signal." error indication is removed
(c) Obsolete "Remote Alarm." warning indication is removed

v1.01

v1.00